Everyone who owns a car doesn’t necessarily know everything about it technically other than to drive it. Brand new cars usually run well for an initial period. But it when you start noticing minor problems that you are aware of its various components like oil change. Just like water lubricates our joints, oil lubricates the various parts of the car, keeping it in shape. It flows over the machines, areas where parts rub against each other and absorbs the heat, lubricating the engine and allowing the internal parts to work together effectively without overheating.

• Identifying the problem: It is important to give your car for first service provided by the same car company.

• Warm up engine and park on level surface: Warm up the engine by driving your car for a short distance this will loosen up the oil which is at the bottom of the tank.

• Draining old oil: The oil drain plug is located at the bottom of the engine and the oil filter is seen on the side of the engine. Be very careful when you drain the oil as it will leak and makes the whole place a mess. It’s better to loosen the cap holding plastic bag so the oil drains into the bag and keep a pan ready under the drain plug to store excess oil. Do the same with oil filter and replace it with the new oil filter.

• Refilling new oil to the car: Locate the reservoir in your bonnet to add new oil. Check the user manual for how much oil has to be poured to the reservoir. You can now pour the oil with a help of a funnel to avoid spilling. Pour it periodically by marking on your dipstick so to get close to top without overflowing and close the cap. Start the car leaving it to run for 2-3 minutes to let the oil flow through the parts.